| Diagram | Fig. 21 — FRONT BRAKE · ref 40 |
| Subsystem | brakes |
| Listed in parts books | 1979–1980, 1983, 1985 |
Hydraulic brake pipe, top lug to tee piece
Hydraulic brake pipe running from the top lug to the tee piece on the front disc brake system.
This is the hydraulic brake pipe that runs from the top lug down to the tee piece on the front brake system, part number 60-7177. It's a section of the plumbing that carries brake fluid from the master cylinder area toward the point where the line splits, feeding the front disc brake setup.
Read more
This pipe shows up in the front brake figure as well as in the air cleaner and side panels figure, which tells you the routing passes through that area of the bike on its way down. It's a hydraulic-system part, so it's used on the later disc-brake Triumphs rather than the earlier drum and cable machines.
If you're replacing brake lines on a disc-equipped Triumph, this is one piece of that puzzle. Have your old pipe or a parts diagram handy to confirm this is the exact run you need before ordering, since brake pipes are routed and shaped specifically for their position in the system.
Sorry if we got something wrong here. If you think this information isn't correct, .