Pièces pour Triumph, BSA & Norton·Expédition mondiale·Appelez l'atelier : (657) 231-9003
Le Hangar 23
Shop/Category/Fig. 34 — SPEEDOMETER AND TACHOMETER/Tachometer cable (28 in. long)
Tachometer cable (28 in. long)
View clickable diagram
Details
Also known asD578
DiagramFig. 34 — SPEEDOMETER AND TACHOMETER · ref 9
Subsystemelectrical
Listed in parts books1966–1974, 1979–1980, 1983, 1985
Also fits (as replacement)1974 · for 60-3933

Tachometer cable (28 in. long)

Triumph tachometer drive cable, 28 inches long, listed in the parts books as 60-0578 (formerly D578).

PN · 60-0578
Supersedes 60-3933 — earlier factory number for this part.

This is the tachometer cable, 28 inches long, that carries the drive from the gearbox or timing chest takeoff up to the tach head on the instrument panel. It's a Triumph part, and it shows up in the parts books under the SPEEDOMETER AND TACHOMETER figure across a long catalog run from 1966 into the mid-1980s. If your parts book lists it as D578, that's the same cable — just the older lettered form of the current 60-0578 number.

Read more

This cable also carries a factory supersession from 60-3933, so if you're working from an older parts list and see that number, you're looking at the same physical piece.

A cable like this wears out from the inside — fraying strands or a dry, stiff outer casing will show up as a jumpy or dead tach needle before the cable snaps outright. Worth checking the routing for tight bends or kinks when you pull the old one, since that's usually what kills these over time.

BackorderAdd it to your cart — we'll source it and confirm the price before you pay.
Pin your bike to check this part fits.

Sorry if we got something wrong here. If you think this information isn't correct, .

Related parts
TACHOMETER GEARBOX (Body E5757)
PN 70-5755 · Goes with this
BackorderView
SEALING WASHER,PETCOCK .500 inches - 12.7mm ID (.880 in OD)
PN 70-7351 · Goes with this
BackorderView
CIRCLIP TACH SPADE
PN 60-0494 · Goes with this
BackorderView
SPADE TACH DRIVE
PN 99-0173 · Goes with this
BackorderView
Driven gear
PN 70-5578 · Goes with this
BackorderView
Any questions about this part?

Ed is at the counter. Tell him what you're working on or what doesn't fit, and he'll take it from there with this part already on the bench.