| Diagram | Fig. 10 — SWINGING ARM · ref 2 |
| Subsystem | suspension rear |
| Listed in parts books | 1969 |
BSA Washer, rear damper top mounting (3/8" × 13/16" × 1/16")
Flat washer for the rear damper top mounting point, 3/8" x 13/16" x 1/16".
This is a flat washer that sits at the top mounting point of the rear damper, where the shock attaches up into the frame. It measures 3/8 inch bore, 13/16 inch outside diameter, and 1/16 inch thick. Simple hardware, but it's the kind of part that's easy to lose track of when you're pulling the rear shocks off for service.
Read more
It shows up in the catalog under the swinging arm figure as well as the frame, footrests, and battery carrier figure, which tells you it's used at the point where the rear suspension ties into the frame structure. Appearances in our records run through the 1969 model year.
If you're rebuilding the rear shock mounts, it's worth having a few of these on hand since they tend to walk off during teardown.
We've never carried this one. Tell us what you're after and we'll go looking — you'll get a price and photos before you commit to anything.
Sorry if we got something wrong here. If you think this information isn't correct, .