| Diagram | INLET MANIFOLDS — Single Carburetter Models (T90, T100S, T100C) |
| Subsystem | engine top |
| Listed in parts books | Not catalogued by year yet |
Socket head screw (2 in. U.H.)
Socket head screw (2 in. U.H.) used on inlet manifold mounting for 1968 single- and twin-carburetter models.
This is a socket head screw listed in the inlet manifold figures for single-carburetter models T90, T100S, and T100C, and it also shows up in the twin-carburetter manifold figure covering T100T and T100R. The catalog lists it at 2 in. U.H., which is the length reference the parts books use for socket screws like this one.
Read more
These fasteners are used to secure the inlet manifold in place on the cylinder head, keeping the carburetor mounting solid and the manifold seated correctly against the port. If you're rebuilding an inlet tract on one of these models it's worth checking your existing screw against this length before ordering, since manifold screws in slightly different lengths can look interchangeable but won't seat the same.
Our catalog record ties this screw specifically to the 1968 model year appearances in these two manifold figures. If your bike falls outside that window, give us a call and we'll confirm before you order.
We've never carried this one. Tell us what you're after and we'll go looking — you'll get a price and photos before you commit to anything.
Sorry if we got something wrong here. If you think this information isn't correct, .