| Diagram | Fig. 9 — CARBURETOR T140V · ref 24 |
| Subsystem | fuel |
| Listed in parts books | 1973, 1976–1977 |
Banjo bolt – fuel pipe to float chamber
Banjo bolt securing the fuel pipe union to the float chamber on Amal carburetors, PN 99-0517 (622/078).
This is the banjo bolt that clamps the fuel pipe union to the float chamber on the Amal carburetor, part number 99-0517, also listed as 622/078. It's a small but important fitting — it holds the banjo fitting tight against the float chamber body so fuel feeds into the carb without leaking or drawing air at the joint.
Read more
It shows up in the catalog under the T140V carburetor figure and in the carburetor throttle linkage section, with catalog appearances spanning 1973 to 1977. If you're rebuilding a float bowl or chasing a fuel leak at the inlet union, this is the bolt to check first — a worn or buggered banjo bolt is a common source of weeping fuel at that joint.
We don't have more detail on this one beyond what's in the parts book. If you're not sure your carb takes this exact bolt, bring in the old one or give us a call before ordering.
We've never carried this one. Tell us what you're after and we'll go looking — you'll get a price and photos before you commit to anything.
Sorry if we got something wrong here. If you think this information isn't correct, .