Parts for Triumph, BSA & Norton·Worldwide shipping·Call the Shop: (657) 231-9003
Le Hangar 23
Shop/Category/Fig. 23 — FRONT BRAKE/Hose, bottom yoke to fork leg (KL 56612)
Hose, bottom yoke to fork leg (KL 56612)
View clickable diagram
Details
DiagramFig. 23 — FRONT BRAKE · ref 33
Subsystembrakes
Listed in parts books1976–1980, 1983

Hose, bottom yoke to fork leg (KL 56612)

Lower front brake hose running from the bottom yoke to the fork leg on hydraulic disc-brake Triumphs.

PN · 60-4175
Available in 3 versions:

This is the lower front brake hose, running from the bottom yoke down to the fork leg on Triumphs fitted with hydraulic front disc brakes. It's the flexible line that carries brake fluid pressure from the upper hose and master cylinder down to the caliper, so the front disc actually works when you pull the lever.

Read more

Catalog listings show this part appearing in FRONT BRAKE and TWIN BRAKE CONDITION figures across a run of years, which tells you it was used on more than one front-brake configuration, including the twin-disc setup. It's a wear item that lives out in the weather, flexing every time the forks move, so if yours is cracked, bulging, or just old, it's worth swapping before it becomes a problem.

When you order, check the fitting ends and length against what's currently on the bike, since front brake hoses varied across the disc-brake era and you want the correct run from yoke to caliper.

$36.49
Pin your bike to check this part fits.

Sorry if we got something wrong here. If you think this information isn't correct, .

Related parts
Sealing washer (KL 44518)
PN 60-4184 · Usually replaced with this
BackorderView
KL58505 — Hose, master cylinder/top yoke 1 For high handlebar
PN 60-4176 · Goes with this
BackorderView
K24103 Nut, hose to bracket
PN 60-4180 · Goes with this
BackorderView
Serrated washer, hose to bracket
PN 70-2288 · Goes with this
BackorderView
Bracket - pipe support
PN 83-7064 · Goes with this
BackorderView
Pipe, fork leg to caliper (ZTA 2070N)
PN 60-4178 · Goes with this
BackorderView
Any questions about this part?

Ed is at the counter. Tell him what you're working on or what doesn't fit, and he'll take it from there with this part already on the bench.