Triumph・BSA・Norton 用パーツ·世界中へ発送·お問い合わせ:(657) 231-9003
Le Hangar 23
Shop/Category/Fig. 6 — TIMING COVER AND CONTACT BREAKER/TIMING COVER T100 59-67
TIMING COVER T100 59-67
View clickable diagram
Details
Also known asE4630
DiagramFig. 6 — TIMING COVER AND CONTACT BREAKER · ref 1
Subsystemengine bottom
Listed in parts books1964–1968

TIMING COVER T100 59-67

Timing cover for the T100, houses the contact breaker and closes off the front of the timing chest.

PN · 70-4630

This is the timing cover for the T100, the part that closes off the front of the timing chest and carries the contact breaker for the ignition. It's the piece you'd pull to get at the points, so if you've ever set gap or timing on one of these motors, you've had this cover off in your hands.

Read more

The catalog lists it for the T100 across 1959-67, and it shows up in our records under the alternate number E4630 as well, which is the earlier form of the same part number. If you're working from an older parts book and see E4630 called out, that's this cover.

It lives in the TIMING COVER AND CONTACT BREAKER section of the parts books, so beyond housing the points it's also the outer face of the timing chest itself. Worth checking your existing cover for cracks or a warped mounting face before you order, since fit against the crankcase matters for keeping the chest sealed.

$99.49
Pin your bike to check this part fits.

Sorry if we got something wrong here. If you think this information isn't correct, .

Related parts
SEAL, POINTS/ TIMING SIDE CRANK OIL FEED - HIGH PRESSURE RATED WITH METAL BACKING - TRIUMPH TWINS AND SINGLES
PN 70-4568 · Usually replaced with this
BackorderView
Joint washer
PN 70-5049 · Usually replaced with this
BackorderView
CONTACT BREAKER, ‘type 4CA
PN 47602 · Goes with this
BackorderView
Contact set
PN 54415803 · Goes with this
BackorderView
Pillar bolt
PN 70-4747 · Goes with this
BackorderView
Contact Breaker Plate Assembly
PN 54419097 · Goes with this
BackorderView
Any questions about this part?

Ed is at the counter. Tell him what you're working on or what doesn't fit, and he'll take it from there with this part already on the bench.