| Also known as | JRC 20-379 |
| Listed in parts books | Not catalogued by year yet |
CAM BUSH REAMER 650/750 TRIUMPH (For Sintered Bronze Only! Not suitable for solid)
A reamer for sizing sintered bronze cam bushes in 650/750 Triumph twins after installation; not for solid bushes.
This is a cam bush reamer for 650 and 750 Triumph twins, a tool rather than a replacement part. It's meant to size a sintered bronze cam bush after it's been pressed into the crankcase, so the camshaft has the correct running clearance once everything is fitted back together.
Read more
The important thing to know before you reach for this reamer: it's made for sintered bronze bushes only. It is not suitable for solid bushes, so check what material bush you're working with before you use it, or you'll end up with a bore that isn't right for the part you installed.
We carry it under our own JRC number, and it also shows up in some catalogs under the older 222-296/C 13/16 designation. Same tool either way.
Sorry if we got something wrong here. If you think this information isn't correct, .