Parts for Triumph, BSA & Norton·Worldwide shipping·Call the Shop: (657) 231-9003
Le Hangar 23
Shop/Category/Fig. 23 — OIL TANK/BREATHER HOSE 1/4 IN
BREATHER HOSE 1/4 IN
View clickable diagram
Details
Also known asE5374
DiagramFig. 23 — OIL TANK · ref 16
Subsystemengine bottom
Listed in parts books1964–1965

BREATHER HOSE 1/4 IN

A 1/4 inch breather hose for the oil tank, shown in catalogs from 1964 to 1965.

PN · 70-5374

This is the breather hose off the oil tank, a 1/4 inch line that vents crankcase pressure as part of the lubrication system. It shows up in the OIL TANK section of the parts book, so it lives right at the tank itself rather than deeper in the engine. Catalog listings for this one run from 1964 to 1965.

Read more

The part also carries the older number E5374, which is the pre-numeric factory form of the same hose, along with an alternate reference 5231K84 2.5 you may see cross-referenced in some catalogs.

Breather hoses are cheap insurance against oil mess and crankcase pressure problems, so if yours is cracked, hardened, or has been replaced with the wrong size tube, it is worth swapping. Bring your bike's parts book or ask us to confirm exact fitment before you order, since the catalog window on this one is narrow.

$6.49
Pin your bike to check this part fits.

Sorry if we got something wrong here. If you think this information isn't correct, .

Related parts
TEE PIPE BREATHER 63-67
PN 70-5370 · Goes with this
BackorderView
Rubber connector
PN 70-3383 · Goes with this
BackorderView
CLIP,OIL TANK BREATHER LINE / SPEEDO CABLE
PN 82-3098 · Goes with this
BackorderView
Joint washer
PN 70-3763 · Goes with this
BackorderView
Any questions about this part?

Ed is at the counter. Tell him what you're working on or what doesn't fit, and he'll take it from there with this part already on the bench.