| Also known as | 06-7337 |
| Listed in parts books | Not catalogued by year yet |
Norton ISOLASTIC VERNIER KIT FRONT,PRE MK3 (USE WITH STOCK MOUNT NO MOD REQUIRED) For MK3 use 067116
Front Vernier-adjustable Isolastic conversion kit for pre-MK3 Norton Commando, fits the stock mount with no modification.
This is the front Isolastic Vernier kit, part number 067337 (also listed as 06-7337), for Norton Commando models built before the MK3. The Isolastic system is what isolates the engine, gearbox, and swinging arm as a single unit from the rest of the frame, using rubber mounts to cut down vibration reaching the rider. On the pre-MK3 bikes that adjustment was originally done with shims, and this kit converts that front mount over to a Vernier-adjustable setup instead, so you can dial in the mount clearance without pulling everything apart and re-shimming each time.
Read more
The listing notes this kit works with the stock mount and does not require any modification to fit - it's meant as a straightforward upgrade over the shim-and-collar arrangement on these earlier bikes. If you've got a MK3 Commando, this isn't the kit you want; the catalog points MK3 owners to part number 067116 instead.
This is a Norton part, not a Triumph part, despite whatever manufacturer code is attached to it in some listings - it belongs entirely to the Commando Isolastic front mounting system.
Sorry if we got something wrong here. If you think this information isn't correct, .