| Also known as | H941 |
| Diagram | Fig. 16 — TELESCOPIC FRONT FORK, 6T · ref 4 |
| Subsystem | forks front |
| Listed in parts books | 1960–1968 |
FORK PINCH BOLT - CHROME 3/8CEI 26 X2.25 UH - For 5/16 use 97-0570 - 97-2290 for UNF
Chrome CEI 3/8-26 fork pinch bolt that clamps the fork tubes in the lower yoke on 6T, TR6, and T120 telescopic forks.
This is the fork pinch bolt Triumph used to clamp the fork tubes down in the lower yoke, chromed, CEI thread, 3/8-26. It's the bolt that runs through the tabs at the base of the headlamp ears and on through the lower fork yoke, so it does double duty securing the fork legs and tying in the nacelle mounting. You'll need a plain washer and nut with it, and it's fitted after the fork tubes have been pulled up through the yoke.
Read more
Our listing shows it across the telescopic front fork figures for the 6T, TR6, and T120, and it also turns up in the nacelle headlamp and switches figure, which tells you how central this bolt is to holding the whole front end together at that clamp point. It carries the size note right in the description: this is the 3/8 CEI version, with 97-0570 covering the 5/16 size and 97-2290 covering the UNF version, so make sure you're ordering the right thread standard for what's already in your yoke.
The old book number for this one is H941, so if you're working from an early parts book and see that number, it's the same bolt as 97-0941. Given the chrome finish is called out plainly, expect a bright polished head when it arrives, and note the modern manufacturing caveats some suppliers mention around chrome plating restrictions, though that's a supplier-side detail rather than anything that changes fitment.
Sorry if we got something wrong here. If you think this information isn't correct, .