Triumph・BSA・Norton 用パーツ·世界中へ発送·お問い合わせ:(657) 231-9003
Le Hangar 23
Shop/Category/Fig. 22 — REAR WHEEL/Brake cam lever
Brake cam lever
View clickable diagram
Details
Also known asW2015
DiagramFig. 22 — REAR WHEEL · ref 22
Subsystemwheels
Listed in parts books1968–1970, 1973–1974

Brake cam lever

Rear brake cam lever that links the brake pedal linkage to the rear drum's brake cam, part number 37-2015.

PN · 37-2015
Available in 2 materials:

This is the brake cam lever for the rear wheel, the arm that connects the brake rod (or cable linkage) to the brake cam inside the rear drum. When you press the rear brake pedal, this lever rotates the cam that spreads the brake shoes against the drum. It's a simple piece of hardware but if it's bent, worn at the pivot, or the splines are stripped, you'll get soft or inconsistent rear brake action no matter how good the shoes are.

Read more

This one shows up in the rear wheel section of the parts books across catalog entries from 1968 into 1974, and it's also carried under the alternate numbers 9998-388 and W2015 if you're cross-checking against an older parts list.

Worth a look any time you're servicing the rear drum or chasing a spongy pedal feel. Check the splined fit where it mates to the cam shaft and make sure the lever isn't cracked or elongated at the pin hole before you put it back into service.

$15.49
Pin your bike to check this part fits.

Sorry if we got something wrong here. If you think this information isn't correct, .

Related parts
REAR BRAKE CAM 53-68 TRI
PN 37-1083 · Goes with this
BackorderView
Lever return spring
PN 37-1090 · Goes with this
BackorderView
PIN REAR BRAKE PIVOT (FLAT TYPE BRAKE ARM) FOR SPLIT TYPE USE 37-0011
PN 37-1467 · Goes with this
BackorderView
Brake anchor plate
PN 37-1112 · Goes with this
BackorderView
Brake drum
PN 37-1498 · Goes with this
BackorderView
BRAKE RETURN SPRING
PN 37-0135 · Goes with this
BackorderView
Any questions about this part?

Ed is at the counter. Tell him what you're working on or what doesn't fit, and he'll take it from there with this part already on the bench.