| Diagram | Fig. 10 — TELESCOPIC FORKS · ref 10 |
| Subsystem | wheels |
| Listed in parts books | 1969, 1971, 1976–1980, 1983, 1985 |
Nut, caliper to mounting plate bolt
A 3/8 inch UNF Cleveloc self-locking nut used at various bolted joints across Triumph forks, wheels, and suspension.
This is a 3/8 inch UNF Cleveloc nut, the self-locking type Triumph used at a number of points where a bolt needs to stay put against vibration. The catalog lists it under the caliper-to-mounting-plate bolt, but it shows up across a wide spread of figures — front forks, front and rear wheels, swinging arm and suspension, even crankcases — so this is a general-purpose locking nut rather than a part built for one single joint.
Read more
Because it's a Cleveloc, the locking action comes from a deformed section in the nut itself rather than a separate nylon insert, so it holds without extra hardware. Given how many different assemblies it turns up in across the catalog span, it's worth keeping a spare or two in a drawer since these get reused any time a bolt on the fork, wheel, or swinging arm side gets pulled apart.
The alternate number 95065A106 is the same physical nut under a different reference. If you're not sure which joint on your bike takes this exact nut, check your parts book figure or call the shop and we'll confirm before you order.
Sorry if we got something wrong here. If you think this information isn't correct, .